- 696 - .692(17.6) .612(15.5) .034(0.86) .030(0.76) 0.309(7.87) 0.289(7.36) .26(6.60) .22(5.59) .20(5.08) hole for #10 screw dia .692(17.6) .612(15.5) .692(17.6) .612(15.5) .692(17.6) .612(15.5) 1.14(29.0) 1.12(28.5) 1.14(29.0) 1.12(28.5) 0.967(24.57) 0.837(21.26) gbpc 40, 50 series high current 40, 50 amps. single phase glass passivated bridge rectifiers voltage range 50 to 1000 volts current 40, 50.0 amperes features ul recognized file # e-96005 glass passivated junction the plastic material used carries underwriters laboratory flammability recognition 94v-0 integrally molded heatsink provide very low thermal resistance for maximum heat dissipation universal 4-way terminals; snap-on, wrap-around, solder or p.c. board mounting surge overload ratings 400 amperes terminals solderable per mil-std-202, method 208 typical i r less than 0.2 ua high temperature soldering guaranteed: 260 / 10 seconds / .375?, (9.5mm) lead lengths isolated voltage from case to lead over 2500 volts gbpc40 gbpc40-m dimensions in inches and (millimeters) maximum ratings and electrical characteristics rating at 25 ambient temperature unless otherwise specified. single phase, half wave, 60 hz, resistive or inductive load. for capacitive load, derate current by 20% type number symbol -005 -01 -02 -04 -06 -08 -10 units maximum recurrent peak reverse voltage v rrm 50 100 200 400 600 800 1000 v maximum rms voltage v rms 35 70 140 280 420 560 700 v maximum dc blocking voltage v dc 50 100 200 400 600 800 1000 v maximum average forward rectified current gbpc40 @t c = 55 gbpc50 i (av) 40.0 50.0 a peak forward surge current, single sine-wave superimposed gbpc40 on rated load (jedec method ) gbpc50 i fsm 400 400 a maximum instantaneous forward voltage drop per gbpc40 @20a element at specified current gbpc50 @25a v f 1.1 v maximum dc reverse current at rated dc blocking voltage per element i r 10 ua typical thermal resistance (note 1) r jc 1.5 / w operating and storage temperature range t j ,t stg -50 to +150 notes: 1. thermal resistance from junction to case. 2. suffix?m? - terminal location face to face.
- 697 - ratings and characteristic curves ( gbpc40005 thru gbpc4010 ) fig.3- typical reverse characteristics per bridge element instantaneous reverse current .( a) 0 20 40 60 80 100 120 140 0.1 1.0 10 100 percent of rated peak reverse voltage. (%) tj=25 c 0 tj=125 c 0 gbpc50005 gbpc5010 fig.2- maximum non-repetitive forward surge current peak for ward surge current . (a) 1 234 1.5 5 6 9 8 710 25 20 15 30 100 60 40 80 20 100 300 400 200 number of cycles at 60hz fig.1- maximum forward current derating curve average for ward current . (a) 160 180 20 40 60 80 100 120 140 0 10 30 20 50 40 70 80 60 case temperature. ( c) o gbpc50 gbpc40 fig.4- typical forward characteristics per bridge element instantaneous for ward current . (a) .6 .8 1.0 1.2 1.4 1.6 1.8 2.0 .1 1 10 100 1000 forward voltage. (v) tj=25 c pulse width-300 s 0 gbpc50 gbpc40
|
